UV DTF Gang Sheet Builder

Create custom UV DTF transfers for compatible smooth, hard surfaces, including glass tumblers, mugs, and acrylic blanks. Upload your artwork and arrange multiple designs on one sheet with our online gang sheet builder.

Enjoy vibrant color and a glossy, slightly raised finish. Your printed transfers apply by peeling, positioning, rubbing firmly, and removing the carrier film. No heat press is required.

Available Sheet Sizes

All sheet dimensions are listed as width × height:

• 11 × 3 inches: 11 inches wide × 3 inches high.
• 11 × 15 inches: 11 inches wide × 15 inches high.

Sheet size is the space available for arranging your artwork, not the size of each individual design. Measure your blank and set each design to its intended finished size in the builder.

How to Order

1. Choose your Sheet Size, then select Build your own Gang Sheet.
2. Upload your artwork and arrange your designs on the sheet. Keep designs inside the sheet boundaries and leave space between them so you can cut them apart.
3. Review each design’s size, spelling, image quality, quantity, and placement. Keep the artwork unmirrored.
4. Select Save & Add to Cart in the builder, then review your cart and complete checkout.

Artwork Guidelines

• Use PNG files with transparent backgrounds.
• Prepare artwork at 300 DPI at the intended print size.
• Upload artwork in its normal reading orientation. Do not mirror.
• Choose bold, clearly defined designs. Very small details, thin lines, and tiny lettering may not transfer or adhere properly.
• Check the final dimensions of every design before ordering.

Application Instructions

Use a clean, dry, smooth hard surface. Surface coatings and textures can affect adhesion, so test compatibility before completing your project.

1. Cut apart the designs you want to use without cutting into the artwork.
2. Carefully peel away the backing, keeping the entire design on the clear carrier film.
3. Align the design on your item and apply it with the adhesive side against the surface.
4. Rub firmly across the entire design with a squeegee, working outward to smooth it onto the surface.
5. Slowly peel away the clear carrier film. If a detail lifts, lay the film back down, rub that area again, and continue peeling carefully.

Care Instructions

Hand wash decorated drinkware. Avoid soaking, dishwashers, and microwaves.

Please Note

This listing is for printed UV DTF transfers only. Cups, tumblers, acrylic blanks, keychains, and other finished items shown are examples and are not included. UV DTF transfers are intended for compatible hard surfaces, not clothing or fabric.

Frequently Asked Questions

Can I apply UV DTF to clothing?
No. Choose our DTF transfers for fabric projects. UV DTF is intended for compatible hard surfaces.

Can I put multiple designs on a sheet?
Yes. Arrange different designs or copies of the same design within your selected sheet size. Leave space between designs for cutting them apart.

Will a design automatically fit my cup or blank?
Measure your item first and set the artwork to the size you need. The listed dimensions refer to the full gang sheet, not a guaranteed fit for a particular blank.