M&M HALLOWEEN - 16 OZ UV DTF WRAP

This listing is for one (1) UV DTF adhesive cup wrap for a 16oz glass cup. (cup not included)

• Premium Printed UV DTF
• Double Sided
• Permanent & Waterproof
• Approximate Size 9.4"x4.1"

Application Instructions

1. Clean glass with alcohol and wait for it to dry COMPLETELY (optional but helps with adherence)
2. Wrap around desired cup to make sure the transfer won’t overlap. Cut sides if necessary.
3. Peel off backing and slowly place on cup, ensuring design is straight and positioned correctly. (The adhesive is very strong. Once the transfer touches the glass, its impossible to take off)
4. Press the transfer down, working from the center outwards, pushing out any bubbles.
5. Rub all over the design with your fingers or squeegee.  The more rubbing the better.
6. Peel clear film off very slowly to make sure all parts of the image stick to the glass.
7. DONE! Wait a few hours (I recommend a full 24) before washing to make sure glue completely cures.

Please Note

*Not all brands of 16 oz. glass cups have the exact same measurements. They can differ by a couple of millimeters. Our wraps have been measured to fit Libbey glass cans. Adjustments may be necessary*

• Hand wash only. We do not recommend use in a dishwasher or microwave. 
• Not recommended for use on cups with a sublimation coating.
• We are not responsible for user error when applying the wraps, damage when applying, wraps not fitting your cups, or damage from the washing.